麻烦老师改成博易的 [博易POBO]
咨询内容：
D:=EMA(C,10);
NNH:=BARSLAST(H=HHV(H,7)) ,NODRAW;
NNL:=BARSLAST(L=LLV(L,7)) ,NODRAW;
//PD:=REF(G,NNH)>REF(D,NNH) ,NODRAW;
NN:=IF(REF(G,NNH)>REF(D,NNH) AND NNH<=4,NNH,IF(REF(G,NNL)<REF(D,NNL) AND NNL<=4,NNL,5)) ,NODRAW;
N:=IF(ISLASTBAR AND NN>0,NN,5) ,NODRAW;
HH:=REF(H,N)=HHV(H,6);
LL:=REF(L,N)=LLV(L,6);
FG01:BACKSET(HH,N+1)>BACKSET(HH,N),NODRAW;//只设置前面第6个
FD01:BACKSET(LL,N+1)>BACKSET(LL,N) ,NODRAW;
FG02:=FG01=FD01 AND G>D,NODRAW;
FD02:FG01=FD01 AND G<D,NODRAW;
//FG02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND G>D,FG01,//高底是同一K看均线位置
// IF(BARSLAST(FD01)>BARSLAST(FG01),FG01,0)),NODRAW;//高点处BARLAST(FG01)=0
//FD02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND D>G,FD01,
//IF(BARSLAST(FG01)>BARSLAST(FD01),FD01,0)),NODRAW;
TTTT:BARSLAST(FD01),NODRAW;
//FG0:=FG01 AND H=HHV(H,IF(FG02=1,BARSLAST(REF(FD01,1))+1,BARSLAST(FD01))) AND FD02=0 ,NODRAW;
//FD0:=FD01 AND L=LLV(L,IF(FD02=1,BARSLAST(REF(FG01,1))+1,BARSLAST(FG01))) AND FG02=0 ,NODRAW;
FG0:=FG01 AND IF(FG02=1,H=HHV(H,BARSLAST(REF(FD01,1))+1),H=HHV(H,IF(BARSLAST(L=LLV(L,7))>=5,5,BARSLAST(FD01)))) AND FD02=0 ,NODRAW;
FD0:=FD01 AND IF(FD02=1,L=LLV(L,BARSLAST(REF(FG01,1))+1),L=LLV(L,IF(BARSLAST(H=HHV(L,7))>=5,5,BARSLAST(FG01)))) AND FG02=0 ,NODRAW;
//高低点间周期
//高低点间周期
GT:BARSLAST(FG0),NODRAW;
DT:BARSLAST(FD0),NODRAW;
//第一次处理高低点间多余的点
LLLL:DT=0 AND REF(DT,1)<GT AND L>REF(L,REF(DT,1)+1),NODRAW;
FG1:BACKSET(REFX(GT,1)=0 AND GT<DT AND REFX(H,1)>=REF(H,GT),GT+1),NODRAW;
FD1:BACKSET(REFX(DT,1)=0 AND DT<GT AND REFX(L,1)<=REF(L,DT),DT+1),NODRAW;
FG11:IF(GT=0 AND REF(GT,1)<DT AND IF(REF(G,BARSLAST(L=LLV(L,7)))>REF(D,BARSLAST(L=LLV(L,7))),BARSLAST(L=LLV(L,7))<5,1) AND H<REF(H,REF(GT,1)+1),1,0),NODRAW;
FD11:IF(DT=0 AND REF(DT,1)<GT AND IF(REF(G,BARSLAST(H=HHV(H,7)))<REF(D,BARSLAST(H=HHV(H,7))),BARSLAST(H=HHV(H,7))<5,1) AND L>REF(L,REF(DT,1)+1),1,0),NODRAW;
//再次周期
GT1:BARSLAST(FG11<>1 AND FG1<>1 AND FG0),NODRAW;
DT1:BARSLAST(FD11<>1 AND FD1<>1 AND FD0),NODRAW;
//GGT1:=REF(GT1,1),NODRAW;
//处理两边都少于3根的笔
//HHHH:REF(H,GT1),NODRAW;
//HHHHH:HHV(H,GT1+5),NODRAW;
FD2:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
//加两句，低是最低，去两边;
//NL:GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 ,NODRAW;
//LLLLLLLL:LLV(L,GT1+5),NODRAW;
FG2A:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)<=LLV(L,GT1+5) AND REF(H,GT1)>HHV(H,GT1+5),GT1+1),NODRAW;
FG2B:IF(GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 AND REF(L,DT1)<=LLV(L,REF(GT1,1)+6) AND H>HHV(H,REF(GT1,1)+6),1,0),NODRAW;
FG2:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
FD2A:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)>=HHV(L,DT1+5) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FD2B:IF(DT1=0 AND GT1<4 AND REF(DT1,1)-GT1<4 AND REF(H,GT1)>=HHV(H,REF(DT1,1)+6) AND L>LLV(L,REF(DT1,1)+6),1,0),NODRAW;
//
//HHV(H,GT1+1)<HHV(H,GT1+15)
//GGG:HHV(H,GT1+1),NODRAW;
//DDD:HHV(H,GT1+15),NODRAW;
//处理单边都少于3根的笔
//GT11:=BARSLAST(GT1=0 AND FG2<>1),NODRAW;
//DT11:=BARSLAST(DT1=0 AND FD2<>1 AND FD20<>1),NODRAW;
//FG21:IF(GT1=0 AND DT1<4 AND H<HHV(H,REF(GT1,1)+3),1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND L>LLV(L,REF(DT1,1)+3) ,1,0),NODRAW;
//FD22:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
//FG22:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
TTTTTT: H<REF(H,REF(GT1,1)+1) AND DT1<4,NODRAW;
HHHHHH:REF(LLV(L,10),DT1),NODRAW;
//前长后短;
FG21:IF(GT1=0 AND DT1<4 AND H<=REF(H,REF(GT1,1)+1) ,1,0),NODRAW;
FD21:IF(DT1=0 AND GT1<4 AND L>=REF(L,REF(DT1,1)+1) ,1,0),NODRAW;
//前短后长,前低后高（去低）;
FD231:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>REF(LLV(L,10),DT1),DT1+1),NODRAW;
FG23:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND (REF(H,GT1)<REF(HHV(H,13),GT1) OR REF(FD231,DT1)=0),GT1+1),NODRAW;
//前短后长,前高后低（去高）;
//NNN:REF(H,GT1)>=REF(HHV(H,8),GT1),NODRAW;
//前短后长，去2;
FG231:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<REF(HHV(H,10),GT1) ,GT1+1),NODRAW;
FD23:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND ( REF(L,DT1)>REF(LLV(L,13),DT1) OR REF(FG231,GT1)=0),DT1+1),NODRAW;
///前短后长，去3;
FDD23:REF(H,GT1)<REF(HHV(H,10),GT1) OR REF(FD23,DT1)=0,NODRAW;
FD24:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)<HHV(H,GT1+3) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FG24:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)>LLV(L,DT1+3) AND REF(H,GT1)<HHV(H,GT1+5),GT1+1),NODRAW;
//FG241:IF(GT1=0 AND DT1>4 AND REF(GT1,1)-DT1<3 AND H<HHV(H,REF(GT1,1)+3) AND REF(FD24,DT1+2)<>1,1,0),NODRAW;
//FD241:IF(DT1=0 AND GT1>4 AND REF(DT1,1)-GT1<3 AND L>LLV(L,REF(DT1,1)+3) AND REF(FG24,GT1+2)<>1,1,0),NODRAW;
//FGE:BACKSET(ISLASTBAR AND DT1-GT1<3 AND DT1>GT1, GT1+1),NODRAW;
//FDE:BACKSET(ISLASTBAR AND GT1-DT1<3 AND GT1>DT1, DT1+1),NODRAW;
//FG21:IF(GT1=0 AND DT1<4 AND REF(GT1,1)<4,1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND REF(DT1,1)<4 ,1,0),NODRAW;
//做两次高低点间多余的点
GT2:BARSLAST(FG21<>1 AND FG23<>1 AND FG231<>1 AND FG24<>1 AND FG2<>1 AND FG2A<>1 AND FG2B<>1 AND GT1=0),NODRAW;
DT2:BARSLAST(FD21<>1 AND FD23<>1 AND FD231<>1 AND FD24<>1 AND FD2<>1 AND FD2A<>1 AND FD2B<>1 AND DT1=0),NODRAW;
FG3:BACKSET(REFX(GT2,1)=0 AND GT2<DT2 AND REFX(H,1)>=REF(H,GT2),GT2+1),NODRAW;
//HHX:REF(H,GT2),NODRAW;
FD3:BACKSET(REFX(DT2,1)=0 AND DT2<GT2 AND REFX(L,1)<=REF(L,DT2),DT2+1),NODRAW;
FG31:IF(GT2=0 AND REF(GT2,1)<DT2 AND H<REF(H,REF(GT2,1)+1),1,0),NODRAW;
FD31:IF(DT2=0 AND REF(DT2,1)<GT2 AND L>REF(L,REF(DT2,1)+1),1,0),NODRAW;
GT3:BARSLAST(GT2=0 AND FG3<>1 AND FG31<>1 ),NODRAW;
DT3:BARSLAST(DT2=0 AND FD3<>1 AND FD31<>1),NODRAW;
FG4:BACKSET(REFX(GT3,1)=0 AND GT3<DT3 AND REFX(H,1)>=REF(H,GT3),GT3+1),NODRAW;
FD4:BACKSET(REFX(DT3,1)=0 AND DT3<GT3 AND REFX(L,1)<=REF(L,DT3),DT3+1),NODRAW;
FG41:IF(GT3=0 AND REF(GT3,1)<DT3 AND H<REF(H,REF(GT3,1)+1),1,0),NODRAW;
FD41:IF(DT3=0 AND REF(DT3,1)<GT3 AND L>REF(L,REF(DT3,1)+1),1,0),NODRAW;
//FD31:IF(DT2=0 AND REF(DT2,1)<REF(GT2,1) AND L>REF(L,DT2+1),1,0),NODRAW;
//HHH:=GT3=0,NODRAW;
//LLL:=DT3=0,NODRAW;
HHH:=GT3=0 AND FG31<>1 AND FG3<>1,NODRAW;
LLL:=DT3=0 AND FD31<>1 AND FD3<>1,NODRAW;
//HHH:=FG0 AND FG11<>1 AND FG1<>1 AND FG2<>1 AND FG21<>1 AND FG31<>1 AND FG3<>1;
//LLL:=FD0 AND FD11<>1 AND FD1<>1 AND FD2<>1 AND FD21<>1 AND FD31<>1 AND FD3<>1;
DRAWLINE1(HHH ,H,LLL,L,0),COLORWHITE,DOT;
DRAWLINE1(LLL,L,HHH ,H,0),COLORWHITE,DOT;
//DIFF := EMA(CLOSE,12) - EMA(CLOSE,26);
//DEA := EMA(DIFF,9);
//MACD:=2*(DIFF-DEA),COLORSTICK;
//R1:=MACD<0&&DEA<0&&REF(MACD,1)<REF(DEA,1)&&MACD>DEA;
//G1:=MACD>0&&DEA>0&&REF(MACD,1)>REF(DEA,1)&&MACD<DEA;
//X:=BACKSET(ISLASTBAR,BARSLAST(G1||R1)+1);
//DRAWSL(CROSS(X,0.5),H,0,1,2,COLORYELLOW);
//DRAWSL(CROSS(X,0.5),H,0,-3,0,COLORYELLOW);
//DRAWSL(CROSS(X,0.5),REF(VALUEWHEN(G1||R1,H),1),0,-BARSLAST(REF(G1||R1,1))-1-3,0,COLORYELLOW);
//X1:=BACKSET(ISLASTBAR,BARSLAST(G1||R1)+1);
//DRAWSL(CROSS(X1,0.5),L,0,1,2,COLORYELLOW);
//DRAWSL(CROSS(X1,0.5),L,0,-3,0,COLORYELLOW);
//DRAWSL(CROSS(X1,0.5),REF(VALUEWHEN(G1||R1,L),1),0,-BARSLAST(REF(G1||R1,1))-1-3,0,COLORYELLOW);
D:=EMA(C,10);
NNH:=BARSLAST(H=HHV(H,7)) ,NODRAW;
NNL:=BARSLAST(L=LLV(L,7)) ,NODRAW;
//PD:=REF(G,NNH)>REF(D,NNH) ,NODRAW;
NN:=IF(REF(G,NNH)>REF(D,NNH) AND NNH<=4,NNH,IF(REF(G,NNL)<REF(D,NNL) AND NNL<=4,NNL,5)) ,NODRAW;
N:=IF(ISLASTBAR AND NN>0,NN,5) ,NODRAW;
HH:=REF(H,N)=HHV(H,6);
LL:=REF(L,N)=LLV(L,6);
FG01:BACKSET(HH,N+1)>BACKSET(HH,N),NODRAW;//只设置前面第6个
FD01:BACKSET(LL,N+1)>BACKSET(LL,N) ,NODRAW;
FG02:=FG01=FD01 AND G>D,NODRAW;
FD02:FG01=FD01 AND G<D,NODRAW;
//FG02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND G>D,FG01,//高底是同一K看均线位置
// IF(BARSLAST(FD01)>BARSLAST(FG01),FG01,0)),NODRAW;//高点处BARLAST(FG01)=0
//FD02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND D>G,FD01,
//IF(BARSLAST(FG01)>BARSLAST(FD01),FD01,0)),NODRAW;
TTTT:BARSLAST(FD01),NODRAW;
//FG0:=FG01 AND H=HHV(H,IF(FG02=1,BARSLAST(REF(FD01,1))+1,BARSLAST(FD01))) AND FD02=0 ,NODRAW;
//FD0:=FD01 AND L=LLV(L,IF(FD02=1,BARSLAST(REF(FG01,1))+1,BARSLAST(FG01))) AND FG02=0 ,NODRAW;
FG0:=FG01 AND IF(FG02=1,H=HHV(H,BARSLAST(REF(FD01,1))+1),H=HHV(H,IF(BARSLAST(L=LLV(L,7))>=5,5,BARSLAST(FD01)))) AND FD02=0 ,NODRAW;
FD0:=FD01 AND IF(FD02=1,L=LLV(L,BARSLAST(REF(FG01,1))+1),L=LLV(L,IF(BARSLAST(H=HHV(L,7))>=5,5,BARSLAST(FG01)))) AND FG02=0 ,NODRAW;
//高低点间周期
//高低点间周期
GT:BARSLAST(FG0),NODRAW;
DT:BARSLAST(FD0),NODRAW;
//第一次处理高低点间多余的点
LLLL:DT=0 AND REF(DT,1)<GT AND L>REF(L,REF(DT,1)+1),NODRAW;
FG1:BACKSET(REFX(GT,1)=0 AND GT<DT AND REFX(H,1)>=REF(H,GT),GT+1),NODRAW;
FD1:BACKSET(REFX(DT,1)=0 AND DT<GT AND REFX(L,1)<=REF(L,DT),DT+1),NODRAW;
FG11:IF(GT=0 AND REF(GT,1)<DT AND IF(REF(G,BARSLAST(L=LLV(L,7)))>REF(D,BARSLAST(L=LLV(L,7))),BARSLAST(L=LLV(L,7))<5,1) AND H<REF(H,REF(GT,1)+1),1,0),NODRAW;
FD11:IF(DT=0 AND REF(DT,1)<GT AND IF(REF(G,BARSLAST(H=HHV(H,7)))<REF(D,BARSLAST(H=HHV(H,7))),BARSLAST(H=HHV(H,7))<5,1) AND L>REF(L,REF(DT,1)+1),1,0),NODRAW;
//再次周期
GT1:BARSLAST(FG11<>1 AND FG1<>1 AND FG0),NODRAW;
DT1:BARSLAST(FD11<>1 AND FD1<>1 AND FD0),NODRAW;
//GGT1:=REF(GT1,1),NODRAW;
//处理两边都少于3根的笔
//HHHH:REF(H,GT1),NODRAW;
//HHHHH:HHV(H,GT1+5),NODRAW;
FD2:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
//加两句，低是最低，去两边;
//NL:GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 ,NODRAW;
//LLLLLLLL:LLV(L,GT1+5),NODRAW;
FG2A:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)<=LLV(L,GT1+5) AND REF(H,GT1)>HHV(H,GT1+5),GT1+1),NODRAW;
FG2B:IF(GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 AND REF(L,DT1)<=LLV(L,REF(GT1,1)+6) AND H>HHV(H,REF(GT1,1)+6),1,0),NODRAW;
FG2:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
FD2A:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)>=HHV(L,DT1+5) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FD2B:IF(DT1=0 AND GT1<4 AND REF(DT1,1)-GT1<4 AND REF(H,GT1)>=HHV(H,REF(DT1,1)+6) AND L>LLV(L,REF(DT1,1)+6),1,0),NODRAW;
//
//HHV(H,GT1+1)<HHV(H,GT1+15)
//GGG:HHV(H,GT1+1),NODRAW;
//DDD:HHV(H,GT1+15),NODRAW;
//处理单边都少于3根的笔
//GT11:=BARSLAST(GT1=0 AND FG2<>1),NODRAW;
//DT11:=BARSLAST(DT1=0 AND FD2<>1 AND FD20<>1),NODRAW;
//FG21:IF(GT1=0 AND DT1<4 AND H<HHV(H,REF(GT1,1)+3),1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND L>LLV(L,REF(DT1,1)+3) ,1,0),NODRAW;
//FD22:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
//FG22:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
TTTTTT: H<REF(H,REF(GT1,1)+1) AND DT1<4,NODRAW;
HHHHHH:REF(LLV(L,10),DT1),NODRAW;
//前长后短;
FG21:IF(GT1=0 AND DT1<4 AND H<=REF(H,REF(GT1,1)+1) ,1,0),NODRAW;
FD21:IF(DT1=0 AND GT1<4 AND L>=REF(L,REF(DT1,1)+1) ,1,0),NODRAW;
//前短后长,前低后高（去低）;
FD231:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>REF(LLV(L,10),DT1),DT1+1),NODRAW;
FG23:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND (REF(H,GT1)<REF(HHV(H,13),GT1) OR REF(FD231,DT1)=0),GT1+1),NODRAW;
//前短后长,前高后低（去高）;
//NNN:REF(H,GT1)>=REF(HHV(H,8),GT1),NODRAW;
//前短后长，去2;
FG231:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<REF(HHV(H,10),GT1) ,GT1+1),NODRAW;
FD23:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND ( REF(L,DT1)>REF(LLV(L,13),DT1) OR REF(FG231,GT1)=0),DT1+1),NODRAW;
///前短后长，去3;
FDD23:REF(H,GT1)<REF(HHV(H,10),GT1) OR REF(FD23,DT1)=0,NODRAW;
FD24:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)<HHV(H,GT1+3) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FG24:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)>LLV(L,DT1+3) AND REF(H,GT1)<HHV(H,GT1+5),GT1+1),NODRAW;
//FG241:IF(GT1=0 AND DT1>4 AND REF(GT1,1)-DT1<3 AND H<HHV(H,REF(GT1,1)+3) AND REF(FD24,DT1+2)<>1,1,0),NODRAW;
//FD241:IF(DT1=0 AND GT1>4 AND REF(DT1,1)-GT1<3 AND L>LLV(L,REF(DT1,1)+3) AND REF(FG24,GT1+2)<>1,1,0),NODRAW;
//FGE:BACKSET(ISLASTBAR AND DT1-GT1<3 AND DT1>GT1, GT1+1),NODRAW;
//FDE:BACKSET(ISLASTBAR AND GT1-DT1<3 AND GT1>DT1, DT1+1),NODRAW;
//FG21:IF(GT1=0 AND DT1<4 AND REF(GT1,1)<4,1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND REF(DT1,1)<4 ,1,0),NODRAW;
//做两次高低点间多余的点
GT2:BARSLAST(FG21<>1 AND FG23<>1 AND FG231<>1 AND FG24<>1 AND FG2<>1 AND FG2A<>1 AND FG2B<>1 AND GT1=0),NODRAW;
DT2:BARSLAST(FD21<>1 AND FD23<>1 AND FD231<>1 AND FD24<>1 AND FD2<>1 AND FD2A<>1 AND FD2B<>1 AND DT1=0),NODRAW;
FG3:BACKSET(REFX(GT2,1)=0 AND GT2<DT2 AND REFX(H,1)>=REF(H,GT2),GT2+1),NODRAW;
//HHX:REF(H,GT2),NODRAW;
FD3:BACKSET(REFX(DT2,1)=0 AND DT2<GT2 AND REFX(L,1)<=REF(L,DT2),DT2+1),NODRAW;
FG31:IF(GT2=0 AND REF(GT2,1)<DT2 AND H<REF(H,REF(GT2,1)+1),1,0),NODRAW;
FD31:IF(DT2=0 AND REF(DT2,1)<GT2 AND L>REF(L,REF(DT2,1)+1),1,0),NODRAW;
GT3:BARSLAST(GT2=0 AND FG3<>1 AND FG31<>1 ),NODRAW;
DT3:BARSLAST(DT2=0 AND FD3<>1 AND FD31<>1),NODRAW;
FG4:BACKSET(REFX(GT3,1)=0 AND GT3<DT3 AND REFX(H,1)>=REF(H,GT3),GT3+1),NODRAW;
FD4:BACKSET(REFX(DT3,1)=0 AND DT3<GT3 AND REFX(L,1)<=REF(L,DT3),DT3+1),NODRAW;
FG41:IF(GT3=0 AND REF(GT3,1)<DT3 AND H<REF(H,REF(GT3,1)+1),1,0),NODRAW;
FD41:IF(DT3=0 AND REF(DT3,1)<GT3 AND L>REF(L,REF(DT3,1)+1),1,0),NODRAW;
//FD31:IF(DT2=0 AND REF(DT2,1)<REF(GT2,1) AND L>REF(L,DT2+1),1,0),NODRAW;
//HHH:=GT3=0,NODRAW;
//LLL:=DT3=0,NODRAW;
HHH:=GT3=0 AND FG31<>1 AND FG3<>1,NODRAW;
LLL:=DT3=0 AND FD31<>1 AND FD3<>1,NODRAW;
//HHH:=FG0 AND FG11<>1 AND FG1<>1 AND FG2<>1 AND FG21<>1 AND FG31<>1 AND FG3<>1;
//LLL:=FD0 AND FD11<>1 AND FD1<>1 AND FD2<>1 AND FD21<>1 AND FD31<>1 AND FD3<>1;
DRAWLINE(HHH ,H,LLL,L,0),COLORWHITE,POINTDOT;
DRAWLINE(LLL,L,HHH ,H,0),COLORWHITE,POINTDOT;
//DIFF := EMA(CLOSE,12) - EMA(CLOSE,26);
//DEA := EMA(DIFF,9);
//MACD:=2*(DIFF-DEA),COLORSTICK;
//R1:=MACD<0&&DEA<0&&REF(MACD,1)<REF(DEA,1)&&MACD>DEA;
//G1:=MACD>0&&DEA>0&&REF(MACD,1)>REF(DEA,1)&&MACD<DEA;
//X:=BACKSET(ISLASTBAR,BARSLAST(G1||R1)+1);
//DRAWSL(CROSS(X,0.5),H,0,1,2,COLORYELLOW);
//DRAWSL(CROSS(X,0.5),H,0,-3,0,COLORYELLOW);
//DRAWSL(CROSS(X,0.5),REF(VALUEWHEN(G1||R1,H),1),0,-BARSLAST(REF(G1||R1,1))-1-3,0,COLORYELLOW);
//X1:=BACKSET(ISLASTBAR,BARSLAST(G1||R1)+1);
//DRAWSL(CROSS(X1,0.5),L,0,1,2,COLORYELLOW);
//DRAWSL(CROSS(X1,0.5),L,0,-3,0,COLORYELLOW);
//DRAWSL(CROSS(X1,0.5),REF(VALUEWHEN(G1||R1,L),1),0,-BARSLAST(REF(G1||R1,1))-1-3,0,COLORYELLOW); 来源 程序化久久网
麻烦老师改成博易的
G:=EMA(C,5);D:=EMA(C,10);
NNH:=BARSLAST(H=HHV(H,7)) ,NODRAW;
NNL:=BARSLAST(L=LLV(L,7)) ,NODRAW;
//PD:=REF(G,NNH)>REF(D,NNH) ,NODRAW;
NN:=IF(REF(G,NNH)>REF(D,NNH) AND NNH<=4,NNH,IF(REF(G,NNL)<REF(D,NNL) AND NNL<=4,NNL,5)) ,NODRAW;
N:=IF(ISLASTBAR AND NN>0,NN,5) ,NODRAW;
HH:=REF(H,N)=HHV(H,6);
LL:=REF(L,N)=LLV(L,6);
FG01:BACKSET(HH,N+1)>BACKSET(HH,N),NODRAW;//只设置前面第6个
FD01:BACKSET(LL,N+1)>BACKSET(LL,N) ,NODRAW;
FG02:=FG01=FD01 AND G>D,NODRAW;
FD02:FG01=FD01 AND G<D,NODRAW;
//FG02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND G>D,FG01,//高底是同一K看均线位置
// IF(BARSLAST(FD01)>BARSLAST(FG01),FG01,0)),NODRAW;//高点处BARLAST(FG01)=0
//FD02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND D>G,FD01,
//IF(BARSLAST(FG01)>BARSLAST(FD01),FD01,0)),NODRAW;
TTTT:BARSLAST(FD01),NODRAW;
//FG0:=FG01 AND H=HHV(H,IF(FG02=1,BARSLAST(REF(FD01,1))+1,BARSLAST(FD01))) AND FD02=0 ,NODRAW;
//FD0:=FD01 AND L=LLV(L,IF(FD02=1,BARSLAST(REF(FG01,1))+1,BARSLAST(FG01))) AND FG02=0 ,NODRAW;
FG0:=FG01 AND IF(FG02=1,H=HHV(H,BARSLAST(REF(FD01,1))+1),H=HHV(H,IF(BARSLAST(L=LLV(L,7))>=5,5,BARSLAST(FD01)))) AND FD02=0 ,NODRAW;
FD0:=FD01 AND IF(FD02=1,L=LLV(L,BARSLAST(REF(FG01,1))+1),L=LLV(L,IF(BARSLAST(H=HHV(L,7))>=5,5,BARSLAST(FG01)))) AND FG02=0 ,NODRAW;
//高低点间周期
//高低点间周期
GT:BARSLAST(FG0),NODRAW;
DT:BARSLAST(FD0),NODRAW;
//第一次处理高低点间多余的点
LLLL:DT=0 AND REF(DT,1)<GT AND L>REF(L,REF(DT,1)+1),NODRAW;
FG1:BACKSET(REFX(GT,1)=0 AND GT<DT AND REFX(H,1)>=REF(H,GT),GT+1),NODRAW;
FD1:BACKSET(REFX(DT,1)=0 AND DT<GT AND REFX(L,1)<=REF(L,DT),DT+1),NODRAW;
FG11:IF(GT=0 AND REF(GT,1)<DT AND IF(REF(G,BARSLAST(L=LLV(L,7)))>REF(D,BARSLAST(L=LLV(L,7))),BARSLAST(L=LLV(L,7))<5,1) AND H<REF(H,REF(GT,1)+1),1,0),NODRAW;
FD11:IF(DT=0 AND REF(DT,1)<GT AND IF(REF(G,BARSLAST(H=HHV(H,7)))<REF(D,BARSLAST(H=HHV(H,7))),BARSLAST(H=HHV(H,7))<5,1) AND L>REF(L,REF(DT,1)+1),1,0),NODRAW;
//再次周期
GT1:BARSLAST(FG11<>1 AND FG1<>1 AND FG0),NODRAW;
DT1:BARSLAST(FD11<>1 AND FD1<>1 AND FD0),NODRAW;
//GGT1:=REF(GT1,1),NODRAW;
//处理两边都少于3根的笔
//HHHH:REF(H,GT1),NODRAW;
//HHHHH:HHV(H,GT1+5),NODRAW;
FD2:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
//加两句，低是最低，去两边;
//NL:GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 ,NODRAW;
//LLLLLLLL:LLV(L,GT1+5),NODRAW;
FG2A:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)<=LLV(L,GT1+5) AND REF(H,GT1)>HHV(H,GT1+5),GT1+1),NODRAW;
FG2B:IF(GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 AND REF(L,DT1)<=LLV(L,REF(GT1,1)+6) AND H>HHV(H,REF(GT1,1)+6),1,0),NODRAW;
FG2:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
FD2A:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)>=HHV(L,DT1+5) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FD2B:IF(DT1=0 AND GT1<4 AND REF(DT1,1)-GT1<4 AND REF(H,GT1)>=HHV(H,REF(DT1,1)+6) AND L>LLV(L,REF(DT1,1)+6),1,0),NODRAW;
//
//HHV(H,GT1+1)<HHV(H,GT1+15)
//GGG:HHV(H,GT1+1),NODRAW;
//DDD:HHV(H,GT1+15),NODRAW;
//处理单边都少于3根的笔
//GT11:=BARSLAST(GT1=0 AND FG2<>1),NODRAW;
//DT11:=BARSLAST(DT1=0 AND FD2<>1 AND FD20<>1),NODRAW;
//FG21:IF(GT1=0 AND DT1<4 AND H<HHV(H,REF(GT1,1)+3),1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND L>LLV(L,REF(DT1,1)+3) ,1,0),NODRAW;
//FD22:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
//FG22:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
TTTTTT: H<REF(H,REF(GT1,1)+1) AND DT1<4,NODRAW;
HHHHHH:REF(LLV(L,10),DT1),NODRAW;
//前长后短;
FG21:IF(GT1=0 AND DT1<4 AND H<=REF(H,REF(GT1,1)+1) ,1,0),NODRAW;
FD21:IF(DT1=0 AND GT1<4 AND L>=REF(L,REF(DT1,1)+1) ,1,0),NODRAW;
//前短后长,前低后高（去低）;
FD231:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>REF(LLV(L,10),DT1),DT1+1),NODRAW;
FG23:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND (REF(H,GT1)<REF(HHV(H,13),GT1) OR REF(FD231,DT1)=0),GT1+1),NODRAW;
//前短后长,前高后低（去高）;
//NNN:REF(H,GT1)>=REF(HHV(H,8),GT1),NODRAW;
//前短后长，去2;
FG231:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<REF(HHV(H,10),GT1) ,GT1+1),NODRAW;
FD23:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND ( REF(L,DT1)>REF(LLV(L,13),DT1) OR REF(FG231,GT1)=0),DT1+1),NODRAW;
///前短后长，去3;
FDD23:REF(H,GT1)<REF(HHV(H,10),GT1) OR REF(FD23,DT1)=0,NODRAW;
FD24:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)<HHV(H,GT1+3) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FG24:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)>LLV(L,DT1+3) AND REF(H,GT1)<HHV(H,GT1+5),GT1+1),NODRAW;
//FG241:IF(GT1=0 AND DT1>4 AND REF(GT1,1)-DT1<3 AND H<HHV(H,REF(GT1,1)+3) AND REF(FD24,DT1+2)<>1,1,0),NODRAW;
//FD241:IF(DT1=0 AND GT1>4 AND REF(DT1,1)-GT1<3 AND L>LLV(L,REF(DT1,1)+3) AND REF(FG24,GT1+2)<>1,1,0),NODRAW;
//FGE:BACKSET(ISLASTBAR AND DT1-GT1<3 AND DT1>GT1, GT1+1),NODRAW;
//FDE:BACKSET(ISLASTBAR AND GT1-DT1<3 AND GT1>DT1, DT1+1),NODRAW;
//FG21:IF(GT1=0 AND DT1<4 AND REF(GT1,1)<4,1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND REF(DT1,1)<4 ,1,0),NODRAW;
//做两次高低点间多余的点
GT2:BARSLAST(FG21<>1 AND FG23<>1 AND FG231<>1 AND FG24<>1 AND FG2<>1 AND FG2A<>1 AND FG2B<>1 AND GT1=0),NODRAW;
DT2:BARSLAST(FD21<>1 AND FD23<>1 AND FD231<>1 AND FD24<>1 AND FD2<>1 AND FD2A<>1 AND FD2B<>1 AND DT1=0),NODRAW;
FG3:BACKSET(REFX(GT2,1)=0 AND GT2<DT2 AND REFX(H,1)>=REF(H,GT2),GT2+1),NODRAW;
//HHX:REF(H,GT2),NODRAW;
FD3:BACKSET(REFX(DT2,1)=0 AND DT2<GT2 AND REFX(L,1)<=REF(L,DT2),DT2+1),NODRAW;
FG31:IF(GT2=0 AND REF(GT2,1)<DT2 AND H<REF(H,REF(GT2,1)+1),1,0),NODRAW;
FD31:IF(DT2=0 AND REF(DT2,1)<GT2 AND L>REF(L,REF(DT2,1)+1),1,0),NODRAW;
GT3:BARSLAST(GT2=0 AND FG3<>1 AND FG31<>1 ),NODRAW;
DT3:BARSLAST(DT2=0 AND FD3<>1 AND FD31<>1),NODRAW;
FG4:BACKSET(REFX(GT3,1)=0 AND GT3<DT3 AND REFX(H,1)>=REF(H,GT3),GT3+1),NODRAW;
FD4:BACKSET(REFX(DT3,1)=0 AND DT3<GT3 AND REFX(L,1)<=REF(L,DT3),DT3+1),NODRAW;
FG41:IF(GT3=0 AND REF(GT3,1)<DT3 AND H<REF(H,REF(GT3,1)+1),1,0),NODRAW;
FD41:IF(DT3=0 AND REF(DT3,1)<GT3 AND L>REF(L,REF(DT3,1)+1),1,0),NODRAW;
//FD31:IF(DT2=0 AND REF(DT2,1)<REF(GT2,1) AND L>REF(L,DT2+1),1,0),NODRAW;
//HHH:=GT3=0,NODRAW;
//LLL:=DT3=0,NODRAW;
HHH:=GT3=0 AND FG31<>1 AND FG3<>1,NODRAW;
LLL:=DT3=0 AND FD31<>1 AND FD3<>1,NODRAW;
//HHH:=FG0 AND FG11<>1 AND FG1<>1 AND FG2<>1 AND FG21<>1 AND FG31<>1 AND FG3<>1;
//LLL:=FD0 AND FD11<>1 AND FD1<>1 AND FD2<>1 AND FD21<>1 AND FD31<>1 AND FD3<>1;
DRAWLINE1(HHH ,H,LLL,L,0),COLORWHITE,DOT;
DRAWLINE1(LLL,L,HHH ,H,0),COLORWHITE,DOT;
//DIFF := EMA(CLOSE,12) - EMA(CLOSE,26);
//DEA := EMA(DIFF,9);
//MACD:=2*(DIFF-DEA),COLORSTICK;
//R1:=MACD<0&&DEA<0&&REF(MACD,1)<REF(DEA,1)&&MACD>DEA;
//G1:=MACD>0&&DEA>0&&REF(MACD,1)>REF(DEA,1)&&MACD<DEA;
//X:=BACKSET(ISLASTBAR,BARSLAST(G1||R1)+1);
//DRAWSL(CROSS(X,0.5),H,0,1,2,COLORYELLOW);
//DRAWSL(CROSS(X,0.5),H,0,-3,0,COLORYELLOW);
//DRAWSL(CROSS(X,0.5),REF(VALUEWHEN(G1||R1,H),1),0,-BARSLAST(REF(G1||R1,1))-1-3,0,COLORYELLOW);
//X1:=BACKSET(ISLASTBAR,BARSLAST(G1||R1)+1);
//DRAWSL(CROSS(X1,0.5),L,0,1,2,COLORYELLOW);
//DRAWSL(CROSS(X1,0.5),L,0,-3,0,COLORYELLOW);
//DRAWSL(CROSS(X1,0.5),REF(VALUEWHEN(G1||R1,L),1),0,-BARSLAST(REF(G1||R1,1))-1-3,0,COLORYELLOW);
来源:程序化99网（ WWW.CXH99.COM ）
博易技术人员： G:=EMA(C,5);D:=EMA(C,10);
NNH:=BARSLAST(H=HHV(H,7)) ,NODRAW;
NNL:=BARSLAST(L=LLV(L,7)) ,NODRAW;
//PD:=REF(G,NNH)>REF(D,NNH) ,NODRAW;
NN:=IF(REF(G,NNH)>REF(D,NNH) AND NNH<=4,NNH,IF(REF(G,NNL)<REF(D,NNL) AND NNL<=4,NNL,5)) ,NODRAW;
N:=IF(ISLASTBAR AND NN>0,NN,5) ,NODRAW;
HH:=REF(H,N)=HHV(H,6);
LL:=REF(L,N)=LLV(L,6);
FG01:BACKSET(HH,N+1)>BACKSET(HH,N),NODRAW;//只设置前面第6个
FD01:BACKSET(LL,N+1)>BACKSET(LL,N) ,NODRAW;
FG02:=FG01=FD01 AND G>D,NODRAW;
FD02:FG01=FD01 AND G<D,NODRAW;
//FG02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND G>D,FG01,//高底是同一K看均线位置
// IF(BARSLAST(FD01)>BARSLAST(FG01),FG01,0)),NODRAW;//高点处BARLAST(FG01)=0
//FD02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND D>G,FD01,
//IF(BARSLAST(FG01)>BARSLAST(FD01),FD01,0)),NODRAW;
TTTT:BARSLAST(FD01),NODRAW;
//FG0:=FG01 AND H=HHV(H,IF(FG02=1,BARSLAST(REF(FD01,1))+1,BARSLAST(FD01))) AND FD02=0 ,NODRAW;
//FD0:=FD01 AND L=LLV(L,IF(FD02=1,BARSLAST(REF(FG01,1))+1,BARSLAST(FG01))) AND FG02=0 ,NODRAW;
FG0:=FG01 AND IF(FG02=1,H=HHV(H,BARSLAST(REF(FD01,1))+1),H=HHV(H,IF(BARSLAST(L=LLV(L,7))>=5,5,BARSLAST(FD01)))) AND FD02=0 ,NODRAW;
FD0:=FD01 AND IF(FD02=1,L=LLV(L,BARSLAST(REF(FG01,1))+1),L=LLV(L,IF(BARSLAST(H=HHV(L,7))>=5,5,BARSLAST(FG01)))) AND FG02=0 ,NODRAW;
//高低点间周期
//高低点间周期
GT:BARSLAST(FG0),NODRAW;
DT:BARSLAST(FD0),NODRAW;
//第一次处理高低点间多余的点
LLLL:DT=0 AND REF(DT,1)<GT AND L>REF(L,REF(DT,1)+1),NODRAW;
FG1:BACKSET(REFX(GT,1)=0 AND GT<DT AND REFX(H,1)>=REF(H,GT),GT+1),NODRAW;
FD1:BACKSET(REFX(DT,1)=0 AND DT<GT AND REFX(L,1)<=REF(L,DT),DT+1),NODRAW;
FG11:IF(GT=0 AND REF(GT,1)<DT AND IF(REF(G,BARSLAST(L=LLV(L,7)))>REF(D,BARSLAST(L=LLV(L,7))),BARSLAST(L=LLV(L,7))<5,1) AND H<REF(H,REF(GT,1)+1),1,0),NODRAW;
FD11:IF(DT=0 AND REF(DT,1)<GT AND IF(REF(G,BARSLAST(H=HHV(H,7)))<REF(D,BARSLAST(H=HHV(H,7))),BARSLAST(H=HHV(H,7))<5,1) AND L>REF(L,REF(DT,1)+1),1,0),NODRAW;
//再次周期
GT1:BARSLAST(FG11<>1 AND FG1<>1 AND FG0),NODRAW;
DT1:BARSLAST(FD11<>1 AND FD1<>1 AND FD0),NODRAW;
//GGT1:=REF(GT1,1),NODRAW;
//处理两边都少于3根的笔
//HHHH:REF(H,GT1),NODRAW;
//HHHHH:HHV(H,GT1+5),NODRAW;
FD2:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
//加两句，低是最低，去两边;
//NL:GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 ,NODRAW;
//LLLLLLLL:LLV(L,GT1+5),NODRAW;
FG2A:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)<=LLV(L,GT1+5) AND REF(H,GT1)>HHV(H,GT1+5),GT1+1),NODRAW;
FG2B:IF(GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 AND REF(L,DT1)<=LLV(L,REF(GT1,1)+6) AND H>HHV(H,REF(GT1,1)+6),1,0),NODRAW;
FG2:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
FD2A:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)>=HHV(L,DT1+5) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FD2B:IF(DT1=0 AND GT1<4 AND REF(DT1,1)-GT1<4 AND REF(H,GT1)>=HHV(H,REF(DT1,1)+6) AND L>LLV(L,REF(DT1,1)+6),1,0),NODRAW;
//
//HHV(H,GT1+1)<HHV(H,GT1+15)
//GGG:HHV(H,GT1+1),NODRAW;
//DDD:HHV(H,GT1+15),NODRAW;
//处理单边都少于3根的笔
//GT11:=BARSLAST(GT1=0 AND FG2<>1),NODRAW;
//DT11:=BARSLAST(DT1=0 AND FD2<>1 AND FD20<>1),NODRAW;
//FG21:IF(GT1=0 AND DT1<4 AND H<HHV(H,REF(GT1,1)+3),1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND L>LLV(L,REF(DT1,1)+3) ,1,0),NODRAW;
//FD22:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
//FG22:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
TTTTTT: H<REF(H,REF(GT1,1)+1) AND DT1<4,NODRAW;
HHHHHH:REF(LLV(L,10),DT1),NODRAW;
//前长后短;
FG21:IF(GT1=0 AND DT1<4 AND H<=REF(H,REF(GT1,1)+1) ,1,0),NODRAW;
FD21:IF(DT1=0 AND GT1<4 AND L>=REF(L,REF(DT1,1)+1) ,1,0),NODRAW;
//前短后长,前低后高（去低）;
FD231:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>REF(LLV(L,10),DT1),DT1+1),NODRAW;
FG23:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND (REF(H,GT1)<REF(HHV(H,13),GT1) OR REF(FD231,DT1)=0),GT1+1),NODRAW;
//前短后长,前高后低（去高）;
//NNN:REF(H,GT1)>=REF(HHV(H,8),GT1),NODRAW;
//前短后长，去2;
FG231:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<REF(HHV(H,10),GT1) ,GT1+1),NODRAW;
FD23:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND ( REF(L,DT1)>REF(LLV(L,13),DT1) OR REF(FG231,GT1)=0),DT1+1),NODRAW;
///前短后长，去3;
FDD23:REF(H,GT1)<REF(HHV(H,10),GT1) OR REF(FD23,DT1)=0,NODRAW;
FD24:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)<HHV(H,GT1+3) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FG24:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)>LLV(L,DT1+3) AND REF(H,GT1)<HHV(H,GT1+5),GT1+1),NODRAW;
//FG241:IF(GT1=0 AND DT1>4 AND REF(GT1,1)-DT1<3 AND H<HHV(H,REF(GT1,1)+3) AND REF(FD24,DT1+2)<>1,1,0),NODRAW;
//FD241:IF(DT1=0 AND GT1>4 AND REF(DT1,1)-GT1<3 AND L>LLV(L,REF(DT1,1)+3) AND REF(FG24,GT1+2)<>1,1,0),NODRAW;
//FGE:BACKSET(ISLASTBAR AND DT1-GT1<3 AND DT1>GT1, GT1+1),NODRAW;
//FDE:BACKSET(ISLASTBAR AND GT1-DT1<3 AND GT1>DT1, DT1+1),NODRAW;
//FG21:IF(GT1=0 AND DT1<4 AND REF(GT1,1)<4,1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND REF(DT1,1)<4 ,1,0),NODRAW;
//做两次高低点间多余的点
GT2:BARSLAST(FG21<>1 AND FG23<>1 AND FG231<>1 AND FG24<>1 AND FG2<>1 AND FG2A<>1 AND FG2B<>1 AND GT1=0),NODRAW;
DT2:BARSLAST(FD21<>1 AND FD23<>1 AND FD231<>1 AND FD24<>1 AND FD2<>1 AND FD2A<>1 AND FD2B<>1 AND DT1=0),NODRAW;
FG3:BACKSET(REFX(GT2,1)=0 AND GT2<DT2 AND REFX(H,1)>=REF(H,GT2),GT2+1),NODRAW;
//HHX:REF(H,GT2),NODRAW;
FD3:BACKSET(REFX(DT2,1)=0 AND DT2<GT2 AND REFX(L,1)<=REF(L,DT2),DT2+1),NODRAW;
FG31:IF(GT2=0 AND REF(GT2,1)<DT2 AND H<REF(H,REF(GT2,1)+1),1,0),NODRAW;
FD31:IF(DT2=0 AND REF(DT2,1)<GT2 AND L>REF(L,REF(DT2,1)+1),1,0),NODRAW;
GT3:BARSLAST(GT2=0 AND FG3<>1 AND FG31<>1 ),NODRAW;
DT3:BARSLAST(DT2=0 AND FD3<>1 AND FD31<>1),NODRAW;
FG4:BACKSET(REFX(GT3,1)=0 AND GT3<DT3 AND REFX(H,1)>=REF(H,GT3),GT3+1),NODRAW;
FD4:BACKSET(REFX(DT3,1)=0 AND DT3<GT3 AND REFX(L,1)<=REF(L,DT3),DT3+1),NODRAW;
FG41:IF(GT3=0 AND REF(GT3,1)<DT3 AND H<REF(H,REF(GT3,1)+1),1,0),NODRAW;
FD41:IF(DT3=0 AND REF(DT3,1)<GT3 AND L>REF(L,REF(DT3,1)+1),1,0),NODRAW;
//FD31:IF(DT2=0 AND REF(DT2,1)<REF(GT2,1) AND L>REF(L,DT2+1),1,0),NODRAW;
//HHH:=GT3=0,NODRAW;
//LLL:=DT3=0,NODRAW;
HHH:=GT3=0 AND FG31<>1 AND FG3<>1,NODRAW;
LLL:=DT3=0 AND FD31<>1 AND FD3<>1,NODRAW;
//HHH:=FG0 AND FG11<>1 AND FG1<>1 AND FG2<>1 AND FG21<>1 AND FG31<>1 AND FG3<>1;
//LLL:=FD0 AND FD11<>1 AND FD1<>1 AND FD2<>1 AND FD21<>1 AND FD31<>1 AND FD3<>1;
DRAWLINE(HHH ,H,LLL,L,0),COLORWHITE,POINTDOT;
DRAWLINE(LLL,L,HHH ,H,0),COLORWHITE,POINTDOT;
//DIFF := EMA(CLOSE,12) - EMA(CLOSE,26);
//DEA := EMA(DIFF,9);
//MACD:=2*(DIFF-DEA),COLORSTICK;
//R1:=MACD<0&&DEA<0&&REF(MACD,1)<REF(DEA,1)&&MACD>DEA;
//G1:=MACD>0&&DEA>0&&REF(MACD,1)>REF(DEA,1)&&MACD<DEA;
//X:=BACKSET(ISLASTBAR,BARSLAST(G1||R1)+1);
//DRAWSL(CROSS(X,0.5),H,0,1,2,COLORYELLOW);
//DRAWSL(CROSS(X,0.5),H,0,-3,0,COLORYELLOW);
//DRAWSL(CROSS(X,0.5),REF(VALUEWHEN(G1||R1,H),1),0,-BARSLAST(REF(G1||R1,1))-1-3,0,COLORYELLOW);
//X1:=BACKSET(ISLASTBAR,BARSLAST(G1||R1)+1);
//DRAWSL(CROSS(X1,0.5),L,0,1,2,COLORYELLOW);
//DRAWSL(CROSS(X1,0.5),L,0,-3,0,COLORYELLOW);
//DRAWSL(CROSS(X1,0.5),REF(VALUEWHEN(G1||R1,L),1),0,-BARSLAST(REF(G1||R1,1))-1-3,0,COLORYELLOW); 来源 程序化久久网
有思路，想编写各种指标公式，交易模型，选股公式，还原公式的朋友
可联系技术人员 QQ: 262069696 或微信号：cxh99cxh99 进行 有偿收费 编写！
(注：由于人数限制，QQ或微信请选择方便的一个联系我们就行，加好友时请简单备注下您的需求，否则无法通过。谢谢您！)
相关文章
-
没有相关内容
会员登录/注册