[求助]帮忙加个声音 [文华财经]
-
咨询内容：
//缠论高低点确认
G:=MA(C,5);
D:=EMA2(C,5);
//求上一个满足7个周期高低点
NNH:=BARSLAST(H=HHV(H,10)) ,NODRAW,NOTEXT;
NNL:=BARSLAST(L=LLV(L,10)) ,NODRAW,NOTEXT;
NN:=IF(REF(G,NNH)>REF(D,NNH) AND NNH<=4,NNH,IF(REF(G,NNL)<REF(D,NNL) AND NNL<=4,NNL,5)) ,NODRAW,NOTEXT;
N:=IF(ISLASTBAR AND NN>0,NN,5),NODRAW,NOTEXT;
HH:=REF(H,N)=HHV(H,6);
LL:=REF(L,N)=LLV(L,6);
FG01:BACKSET(HH,N+1)>BACKSET(HH,N),NODRAW,NOTEXT;//只设置前面第6个
FD01:BACKSET(LL,N+1)>BACKSET(LL,N) ,NODRAW,NOTEXT;
FG02:=FG01=FD01 AND G>D,NODRAW,NOTEXT;
FD02:FG01=FD01 AND G<D,NODRAW,NOTEXT;
TTTT:BARSLAST(FD01),NODRAW,NOTEXT;
FG0:=FG01 AND IF(FG02=1,H=HHV(H,BARSLAST(REF(FD01,1))+1),H=HHV(H,IF(BARSLAST(L=LLV(L,7))>=5,5,BARSLAST(FD01)))) AND FD02=0 ,NODRAW,NOTEXT;
FD0:=FD01 AND IF(FD02=1,L=LLV(L,BARSLAST(REF(FG01,1))+1),L=LLV(L,IF(BARSLAST(H=HHV(L,7))>=5,5,BARSLAST(FG01)))) AND FG02=0 ,NODRAW,NOTEXT;
//高低点间周期
GT:BARSLAST(FG0),NODRAW,NOTEXT;
DT:BARSLAST(FD0),NODRAW,NOTEXT;
//第一次处理高低点间多余的点
LLLL:DT=0 AND REF(DT,1)<GT AND L>REF(L,REF(DT,1)+1),NODRAW,NOTEXT;
FG1:BACKSET(REFX(GT,1)=0 AND GT<DT AND REFX(H,1)>=REF(H,GT),GT+1),NODRAW,NOTEXT;
FD1:BACKSET(REFX(DT,1)=0 AND DT<GT AND REFX(L,1)<=REF(L,DT),DT+1),NODRAW,NOTEXT;
FG11:IF(GT=0 AND REF(GT,1)<DT AND IF(REF(G,BARSLAST(L=LLV(L,7)))>REF(D,BARSLAST(L=LLV(L,7))),BARSLAST(L=LLV(L,7))<5,1) AND H<REF(H,REF(GT,1)+1),1,0),NODRAW,NOTEXT;
FD11:IF(DT=0 AND REF(DT,1)<GT AND IF(REF(G,BARSLAST(H=HHV(H,7)))<REF(D,BARSLAST(H=HHV(H,7))),BARSLAST(H=HHV(H,7))<5,1) AND L>REF(L,REF(DT,1)+1),1,0),NODRAW,NOTEXT;
//再次周期
GT1:BARSLAST(FG11<>1 AND FG1<>1 AND FG0),NODRAW,NOTEXT;
DT1:BARSLAST(FD11<>1 AND FD1<>1 AND FD0),NODRAW,NOTEXT;
FD2:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW,NOTEXT;
FG2A:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)<=LLV(L,GT1+5) AND REF(H,GT1)>HHV(H,GT1+5),GT1+1),NODRAW,NOTEXT;
FG2B:IF(GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 AND REF(L,DT1)<=LLV(L,REF(GT1,1)+6) AND H>HHV(H,REF(GT1,1)+6),1,0),NODRAW,NOTEXT;
FG2:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW,NOTEXT;
FD2A:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)>=HHV(L,DT1+5) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW,NOTEXT;
FD2B:IF(DT1=0 AND GT1<4 AND REF(DT1,1)-GT1<4 AND REF(H,GT1)>=HHV(H,REF(DT1,1)+6) AND L>LLV(L,REF(DT1,1)+6),1,0),NODRAW,NOTEXT;
TTTTTT: H<REF(H,REF(GT1,1)+1) AND DT1<4,NODRAW,NOTEXT;
HHHHHH:REF(LLV(L,10),DT1),NODRAW,NOTEXT;
//前长后短;
FG21:IF(GT1=0 AND DT1<4 AND H<=REF(H,REF(GT1,1)+1) ,1,0),NODRAW,NOTEXT;
FD21:IF(DT1=0 AND GT1<4 AND L>=REF(L,REF(DT1,1)+1) ,1,0),NODRAW,NOTEXT;
//前短后长,前低后高（去低）;
FD231:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>REF(LLV(L,10),DT1),DT1+1),NODRAW,NOTEXT;
FG23:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND (REF(H,GT1)<REF(HHV(H,13),GT1) OR REF(FD231,DT1)=0),GT1+1),NODRAW,NOTEXT;
FG231:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<REF(HHV(H,10),GT1) ,GT1+1),NODRAW,NOTEXT;
FD23:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND ( REF(L,DT1)>REF(LLV(L,13),DT1) OR REF(FG231,GT1)=0),DT1+1),NODRAW,NOTEXT;
FDD23:REF(H,GT1)<REF(HHV(H,10),GT1) OR REF(FD23,DT1)=0,NODRAW,NOTEXT;
FD24:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)<HHV(H,GT1+3) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW,NOTEXT;
FG24:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)>LLV(L,DT1+3) AND REF(H,GT1)<HHV(H,GT1+5),GT1+1),NODRAW,NOTEXT;
GT2:BARSLAST(FG21<>1 AND FG23<>1 AND FG231<>1 AND FG24<>1 AND FG2<>1 AND FG2A<>1 AND FG2B<>1 AND GT1=0),NODRAW,NOTEXT;
DT2:BARSLAST(FD21<>1 AND FD23<>1 AND FD231<>1 AND FD24<>1 AND FD2<>1 AND FD2A<>1 AND FD2B<>1 AND DT1=0),NODRAW,NOTEXT;
FG3:BACKSET(REFX(GT2,1)=0 AND GT2<DT2 AND REFX(H,1)>=REF(H,GT2),GT2+1),NODRAW,NOTEXT;
FD3:BACKSET(REFX(DT2,1)=0 AND DT2<GT2 AND REFX(L,1)<=REF(L,DT2),DT2+1),NODRAW,NOTEXT;
FG31:IF(GT2=0 AND REF(GT2,1)<DT2 AND H<REF(H,REF(GT2,1)+1),1,0),NODRAW,NOTEXT;
FD31:IF(DT2=0 AND REF(DT2,1)<GT2 AND L>REF(L,REF(DT2,1)+1),1,0),NODRAW,NOTEXT;
GT3:BARSLAST(GT2=0 AND FG3<>1 AND FG31<>1 ),NODRAW,NOTEXT;
DT3:BARSLAST(DT2=0 AND FD3<>1 AND FD31<>1),NODRAW,NOTEXT;
FG4:BACKSET(REFX(GT3,1)=0 AND GT3<DT3 AND REFX(H,1)>=REF(H,GT3),GT3+1),NODRAW,NOTEXT;
FD4:BACKSET(REFX(DT3,1)=0 AND DT3<GT3 AND REFX(L,1)<=REF(L,DT3),DT3+1),NODRAW,NOTEXT;
FG41:IF(GT3=0 AND REF(GT3,1)<DT3 AND H<REF(H,REF(GT3,1)+1),1,0),NODRAW,NOTEXT;
FD41:IF(DT3=0 AND REF(DT3,1)<GT3 AND L>REF(L,REF(DT3,1)+1),1,0),NODRAW,NOTEXT;
HHH:=GT3=0 AND FG31<>1 AND FG3<>1,NODRAW,NOTEXT;
LLL:=DT3=0 AND FD31<>1 AND FD3<>1,NODRAW,NOTEXT;
DRAWCOLORKLINE( HHH ,COLORMAGENTA,0);
DRAWCOLORKLINE(LLL,COLORMAGENTA,0);
DRAWCOLORKLINE(HHH,COLORBLUE,0);
DRAWCOLORKLINE(LLL,COLORMAGENTA,0);
//--------------------------------高低点
// {笔底分型 选股 预警 确保向下笔成立后的底分型}
V00:=HIGH<REF(HIGH,1) AND LOW<REF(LOW,1);
V01:=HIGH<REF(HIGH,1) AND LOW>REF(LOW,1);
V02:=HIGH>REF(HIGH,1) AND LOW<REF(LOW,1);
V03:=HIGH>REF(HIGH,1) AND LOW>REF(LOW,1);
V04:=REF(HIGH,2) < HIGH AND REF(LOW,2) < LOW AND REF(HIGH,2) > REF(HIGH,1) AND REF(LOW,2) < REF(LOW,1);
V1:= COUNT(V00,6)>=3 AND COUNT(V01 OR V02,5)=0 AND LLVBARS(LOW,6) = 1 AND HHVBARS(HIGH,6) >= 5 AND V03;
V2:= COUNT(V00,7)>=3 AND COUNT(V01 OR V02,6)=1 AND LLVBARS(LOW,7) = 2 AND HHVBARS(HIGH,7) >= 6 AND V04;
V3:= COUNT(V00,7)>=3 AND COUNT(V01 OR V02,6)=1 AND LLVBARS(LOW,7) = 1 AND HHVBARS(HIGH,7) >= 6 AND V03;
V4:= COUNT(V00,8)>=3 AND COUNT(V01 OR V02,7)<=2 AND LLVBARS(LOW,8) = 2 AND HHVBARS(HIGH,8) >= 7 AND V04;
V5:= COUNT(V00,8)>=3 AND COUNT(V01 OR V02,7)<=2 AND LLVBARS(LOW,8) = 1 AND HHVBARS(HIGH,8) >= 7 AND V03;
V6:= COUNT(V00,9)>=3 AND COUNT(V01 OR V02,8)<=3 AND LLVBARS(LOW,9) = 2 AND HHVBARS(HIGH,9) >= 8 AND V04;
V7:= COUNT(V00,9)>=3 AND COUNT(V01 OR V02,8)<=3 AND LLVBARS(LOW,9) = 1 AND HHVBARS(HIGH,9) >= 8 AND V03;
V8:= COUNT(V00,10)>=3 AND COUNT(V01 OR V02,9)<=4 AND LLVBARS(LOW,10) = 2 AND HHVBARS(HIGH,10) >= 9 AND V04;
V9:= COUNT(V00,10)>=3 AND COUNT(V01 OR V02,9)<=4 AND LLVBARS(LOW,10) = 1 AND HHVBARS(HIGH,10) >= 9 AND V03;
V10:=COUNT(V00,11)>=3 AND COUNT(V01 OR V02,10)<=5 AND LLVBARS(LOW,11) = 2 AND HHVBARS(HIGH,11) >= 10 AND V04;
XG:= V1 OR V2 OR V3 OR V4 OR V5 OR V6 OR V7 OR V8 OR V9 OR V10;
DRAWICON(FILTER(XG=1,5),L*1,4);
{底分型}
{笔顶分型 选股 预警 确保向上笔成立后的顶分型}
HV00:=HIGH>REF(HIGH,1) AND LOW>REF(LOW,1);
HV01:=HIGH<REF(HIGH,1) AND LOW>REF(LOW,1);
HV02:=HIGH>REF(HIGH,1) AND LOW<REF(LOW,1);
HV03:=HIGH<REF(HIGH,1) AND LOW<REF(LOW,1);
HV04:=REF(HIGH,2) > HIGH AND REF(LOW,2) > LOW AND REF(HIGH,2) > REF(HIGH,1) AND REF(LOW,2) < REF(LOW,1);
HV1:= COUNT(HV00,6)>=3 AND COUNT(HV01 OR HV02,5)=0 AND HHVBARS(HIGH,6) = 1 AND LLVBARS(LOW,6) >= 5 AND HV03;
HV2:= COUNT(HV00,7)>=3 AND COUNT(HV01 OR HV02,6)=1 AND HHVBARS(HIGH,7) = 2 AND LLVBARS(LOW,7) >= 6 AND HV04;
HV3:= COUNT(HV00,7)>=3 AND COUNT(HV01 OR HV02,6)=1 AND HHVBARS(HIGH,7) = 1 AND LLVBARS(LOW,7) >= 6 AND HV03;
HV4:= COUNT(HV00,8)>=3 AND COUNT(HV01 OR HV02,7)<=2 AND HHVBARS(HIGH,8) = 2 AND LLVBARS(LOW,8) >= 7 AND HV04;
HV5:= COUNT(HV00,8)>=3 AND COUNT(HV01 OR HV02,7)<=2 AND HHVBARS(HIGH,8) = 1 AND LLVBARS(LOW,8) >= 7 AND HV03;
HV6:= COUNT(HV00,9)>=3 AND COUNT(HV01 OR HV02,8)<=3 AND HHVBARS(HIGH,9) = 2 AND LLVBARS(LOW,9) >= 8 AND HV04;
HV7:= COUNT(HV00,9)>=3 AND COUNT(HV01 OR HV02,8)<=3 AND HHVBARS(HIGH,9) = 1 AND LLVBARS(LOW,9) >= 8 AND HV03;
HV8:= COUNT(HV00,10)>=3 AND COUNT(HV01 OR HV02,9)<=4 AND HHVBARS(HIGH,10) = 2 AND LLVBARS(LOW,10) >= 9 AND HV04;
HV9:= COUNT(HV00,10)>=3 AND COUNT(HV01 OR HV02,9)<=4 AND HHVBARS(HIGH,10) = 1 AND LLVBARS(LOW,10) >= 9 AND HV03;
HV10:=COUNT(HV00,11)>=3 AND COUNT(HV01 OR HV02,10)<=5 AND HHVBARS(HIGH,11) = 2 AND LLVBARS(LOW,11) >= 10 AND HV04;
HXG:= HV1 OR HV2 OR HV3 OR HV4 OR HV5 OR HV6 OR HV7 OR HV8 OR HV9 OR HV10;
DRAWICON(FILTER(HXG=1,3),H*1,5);
//DRAWTEXT(HXG,H,'分型';
//DRAWTEXT(XG,L,'分型',VALIGN0; // ------------------------------------分型
DRAWTEXT(HXG&&BARSLAST(HHH)<=2,H,'开';
DRAWTEXT(XG&&BARSLAST(LLL)<=2,L,'开',VALIGN0; // ------------------------------------分型
在买开。卖开出现的时候帮忙加个声音
而且帮忙看一下这个信号是不是会漂移的，我总感觉有未来函数来源:程序化99
-
文华技术人员：
参考：
含有未来函数BACKSET
参考：
//缠论高低点确认G:=MA(C,5);D:=EMA2(C,5);//求上一个满足7个周期高低点NNH:=BARSLAST(H=HHV(H,10)) ,NODRAW,NOTEXT;NNL:=BARSLAST(L=LLV(L,10)) ,NODRAW,NOTEXT;NN:=IF(REF(G,NNH)>REF(D,NNH) AND NNH<=4,NNH,IF(REF(G,NNL)<REF(D,NNL) AND NNL<=4,NNL,5)) ,NODRAW,NOTEXT;N:=IF(ISLASTBAR AND NN>0,NN,5),NODRAW,NOTEXT;HH:=REF(H,N)=HHV(H,6);LL:=REF(L,N)=LLV(L,6);FG01:BACKSET(HH,N+1)>BACKSET(HH,N),NODRAW,NOTEXT;//只设置前面第6个FD01:BACKSET(LL,N+1)>BACKSET(LL,N) ,NODRAW,NOTEXT;FG02:=FG01=FD01 AND G>D,NODRAW,NOTEXT;FD02:FG01=FD01 AND G<D,NODRAW,NOTEXT;TTTT:BARSLAST(FD01),NODRAW,NOTEXT;FG0:=FG01 AND IF(FG02=1,H=HHV(H,BARSLAST(REF(FD01,1))+1),H=HHV(H,IF(BARSLAST(L=LLV(L,7))>=5,5,BARSLAST(FD01)))) AND FD02=0 ,NODRAW,NOTEXT;FD0:=FD01 AND IF(FD02=1,L=LLV(L,BARSLAST(REF(FG01,1))+1),L=LLV(L,IF(BARSLAST(H=HHV(L,7))>=5,5,BARSLAST(FG01)))) AND FG02=0 ,NODRAW,NOTEXT;//高低点间周期GT:BARSLAST(FG0),NODRAW,NOTEXT;DT:BARSLAST(FD0),NODRAW,NOTEXT;//第一次处理高低点间多余的点LLLL:DT=0 AND REF(DT,1)<GT AND L>REF(L,REF(DT,1)+1),NODRAW,NOTEXT;FG1:BACKSET(REFX(GT,1)=0 AND GT<DT AND REFX(H,1)>=REF(H,GT),GT+1),NODRAW,NOTEXT;FD1:BACKSET(REFX(DT,1)=0 AND DT<GT AND REFX(L,1)<=REF(L,DT),DT+1),NODRAW,NOTEXT;FG11:IF(GT=0 AND REF(GT,1)<DT AND IF(REF(G,BARSLAST(L=LLV(L,7)))>REF(D,BARSLAST(L=LLV(L,7))),BARSLAST(L=LLV(L,7))<5,1) AND H<REF(H,REF(GT,1)+1),1,0),NODRAW,NOTEXT;FD11:IF(DT=0 AND REF(DT,1)<GT AND IF(REF(G,BARSLAST(H=HHV(H,7)))<REF(D,BARSLAST(H=HHV(H,7))),BARSLAST(H=HHV(H,7))<5,1) AND L>REF(L,REF(DT,1)+1),1,0),NODRAW,NOTEXT;//再次周期GT1:BARSLAST(FG11<>1 AND FG1<>1 AND FG0),NODRAW,NOTEXT;DT1:BARSLAST(FD11<>1 AND FD1<>1 AND FD0),NODRAW,NOTEXT;FD2:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW,NOTEXT;FG2A:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)<=LLV(L,GT1+5) AND REF(H,GT1)>HHV(H,GT1+5),GT1+1),NODRAW,NOTEXT;FG2B:IF(GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 AND REF(L,DT1)<=LLV(L,REF(GT1,1)+6) AND H>HHV(H,REF(GT1,1)+6),1,0),NODRAW,NOTEXT;FG2:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW,NOTEXT;FD2A:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)>=HHV(L,DT1+5) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW,NOTEXT;FD2B:IF(DT1=0 AND GT1<4 AND REF(DT1,1)-GT1<4 AND REF(H,GT1)>=HHV(H,REF(DT1,1)+6) AND L>LLV(L,REF(DT1,1)+6),1,0),NODRAW,NOTEXT;TTTTTT: H<REF(H,REF(GT1,1)+1) AND DT1<4,NODRAW,NOTEXT;HHHHHH:REF(LLV(L,10),DT1),NODRAW,NOTEXT;//前长后短;FG21:IF(GT1=0 AND DT1<4 AND H<=REF(H,REF(GT1,1)+1) ,1,0),NODRAW,NOTEXT;FD21:IF(DT1=0 AND GT1<4 AND L>=REF(L,REF(DT1,1)+1) ,1,0),NODRAW,NOTEXT;//前短后长,前低后高（去低）;FD231:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>REF(LLV(L,10),DT1),DT1+1),NODRAW,NOTEXT;FG23:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND (REF(H,GT1)<REF(HHV(H,13),GT1) OR REF(FD231,DT1)=0),GT1+1),NODRAW,NOTEXT;FG231:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<REF(HHV(H,10),GT1) ,GT1+1),NODRAW,NOTEXT;FD23:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND ( REF(L,DT1)>REF(LLV(L,13),DT1) OR REF(FG231,GT1)=0),DT1+1),NODRAW,NOTEXT;FDD23:REF(H,GT1)<REF(HHV(H,10),GT1) OR REF(FD23,DT1)=0,NODRAW,NOTEXT;FD24:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)<HHV(H,GT1+3) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW,NOTEXT;FG24:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)>LLV(L,DT1+3) AND REF(H,GT1)<HHV(H,GT1+5),GT1+1),NODRAW,NOTEXT;GT2:BARSLAST(FG21<>1 AND FG23<>1 AND FG231<>1 AND FG24<>1 AND FG2<>1 AND FG2A<>1 AND FG2B<>1 AND GT1=0),NODRAW,NOTEXT;DT2:BARSLAST(FD21<>1 AND FD23<>1 AND FD231<>1 AND FD24<>1 AND FD2<>1 AND FD2A<>1 AND FD2B<>1 AND DT1=0),NODRAW,NOTEXT;FG3:BACKSET(REFX(GT2,1)=0 AND GT2<DT2 AND REFX(H,1)>=REF(H,GT2),GT2+1),NODRAW,NOTEXT;FD3:BACKSET(REFX(DT2,1)=0 AND DT2<GT2 AND REFX(L,1)<=REF(L,DT2),DT2+1),NODRAW,NOTEXT;FG31:IF(GT2=0 AND REF(GT2,1)<DT2 AND H<REF(H,REF(GT2,1)+1),1,0),NODRAW,NOTEXT;FD31:IF(DT2=0 AND REF(DT2,1)<GT2 AND L>REF(L,REF(DT2,1)+1),1,0),NODRAW,NOTEXT;GT3:BARSLAST(GT2=0 AND FG3<>1 AND FG31<>1 ),NODRAW,NOTEXT;DT3:BARSLAST(DT2=0 AND FD3<>1 AND FD31<>1),NODRAW,NOTEXT;FG4:BACKSET(REFX(GT3,1)=0 AND GT3<DT3 AND REFX(H,1)>=REF(H,GT3),GT3+1),NODRAW,NOTEXT;FD4:BACKSET(REFX(DT3,1)=0 AND DT3<GT3 AND REFX(L,1)<=REF(L,DT3),DT3+1),NODRAW,NOTEXT;FG41:IF(GT3=0 AND REF(GT3,1)<DT3 AND H<REF(H,REF(GT3,1)+1),1,0),NODRAW,NOTEXT;FD41:IF(DT3=0 AND REF(DT3,1)<GT3 AND L>REF(L,REF(DT3,1)+1),1,0),NODRAW,NOTEXT;HHH:=GT3=0 AND FG31<>1 AND FG3<>1,NODRAW,NOTEXT;LLL:=DT3=0 AND FD31<>1 AND FD3<>1,NODRAW,NOTEXT;DRAWCOLORKLINE( HHH ,COLORMAGENTA,0);DRAWCOLORKLINE(LLL,COLORMAGENTA,0);
DRAWCOLORKLINE(HHH,COLORBLUE,0);DRAWCOLORKLINE(LLL,COLORMAGENTA,0); //--------------------------------高低点
// {笔底分型 选股 预警 确保向下笔成立后的底分型}V00:=HIGH<REF(HIGH,1) AND LOW<REF(LOW,1);V01:=HIGH<REF(HIGH,1) AND LOW>REF(LOW,1);V02:=HIGH>REF(HIGH,1) AND LOW<REF(LOW,1);V03:=HIGH>REF(HIGH,1) AND LOW>REF(LOW,1);V04:=REF(HIGH,2) < HIGH AND REF(LOW,2) < LOW AND REF(HIGH,2) > REF(HIGH,1) AND REF(LOW,2) < REF(LOW,1);V1:= COUNT(V00,6)>=3 AND COUNT(V01 OR V02,5)=0 AND LLVBARS(LOW,6) = 1 AND HHVBARS(HIGH,6) >= 5 AND V03;V2:= COUNT(V00,7)>=3 AND COUNT(V01 OR V02,6)=1 AND LLVBARS(LOW,7) = 2 AND HHVBARS(HIGH,7) >= 6 AND V04;V3:= COUNT(V00,7)>=3 AND COUNT(V01 OR V02,6)=1 AND LLVBARS(LOW,7) = 1 AND HHVBARS(HIGH,7) >= 6 AND V03;V4:= COUNT(V00,8)>=3 AND COUNT(V01 OR V02,7)<=2 AND LLVBARS(LOW,8) = 2 AND HHVBARS(HIGH,8) >= 7 AND V04;V5:= COUNT(V00,8)>=3 AND COUNT(V01 OR V02,7)<=2 AND LLVBARS(LOW,8) = 1 AND HHVBARS(HIGH,8) >= 7 AND V03;V6:= COUNT(V00,9)>=3 AND COUNT(V01 OR V02,8)<=3 AND LLVBARS(LOW,9) = 2 AND HHVBARS(HIGH,9) >= 8 AND V04;V7:= COUNT(V00,9)>=3 AND COUNT(V01 OR V02,8)<=3 AND LLVBARS(LOW,9) = 1 AND HHVBARS(HIGH,9) >= 8 AND V03;V8:= COUNT(V00,10)>=3 AND COUNT(V01 OR V02,9)<=4 AND LLVBARS(LOW,10) = 2 AND HHVBARS(HIGH,10) >= 9 AND V04;V9:= COUNT(V00,10)>=3 AND COUNT(V01 OR V02,9)<=4 AND LLVBARS(LOW,10) = 1 AND HHVBARS(HIGH,10) >= 9 AND V03;V10:=COUNT(V00,11)>=3 AND COUNT(V01 OR V02,10)<=5 AND LLVBARS(LOW,11) = 2 AND HHVBARS(HIGH,11) >= 10 AND V04;XG:= V1 OR V2 OR V3 OR V4 OR V5 OR V6 OR V7 OR V8 OR V9 OR V10;DRAWICON(FILTER(XG=1,5),L*1,4);{底分型}{笔顶分型 选股 预警 确保向上笔成立后的顶分型}HV00:=HIGH>REF(HIGH,1) AND LOW>REF(LOW,1);HV01:=HIGH<REF(HIGH,1) AND LOW>REF(LOW,1);HV02:=HIGH>REF(HIGH,1) AND LOW<REF(LOW,1);HV03:=HIGH<REF(HIGH,1) AND LOW<REF(LOW,1);HV04:=REF(HIGH,2) > HIGH AND REF(LOW,2) > LOW AND REF(HIGH,2) > REF(HIGH,1) AND REF(LOW,2) < REF(LOW,1);HV1:= COUNT(HV00,6)>=3 AND COUNT(HV01 OR HV02,5)=0 AND HHVBARS(HIGH,6) = 1 AND LLVBARS(LOW,6) >= 5 AND HV03;HV2:= COUNT(HV00,7)>=3 AND COUNT(HV01 OR HV02,6)=1 AND HHVBARS(HIGH,7) = 2 AND LLVBARS(LOW,7) >= 6 AND HV04;HV3:= COUNT(HV00,7)>=3 AND COUNT(HV01 OR HV02,6)=1 AND HHVBARS(HIGH,7) = 1 AND LLVBARS(LOW,7) >= 6 AND HV03;HV4:= COUNT(HV00,8)>=3 AND COUNT(HV01 OR HV02,7)<=2 AND HHVBARS(HIGH,8) = 2 AND LLVBARS(LOW,8) >= 7 AND HV04;HV5:= COUNT(HV00,8)>=3 AND COUNT(HV01 OR HV02,7)<=2 AND HHVBARS(HIGH,8) = 1 AND LLVBARS(LOW,8) >= 7 AND HV03;HV6:= COUNT(HV00,9)>=3 AND COUNT(HV01 OR HV02,8)<=3 AND HHVBARS(HIGH,9) = 2 AND LLVBARS(LOW,9) >= 8 AND HV04;HV7:= COUNT(HV00,9)>=3 AND COUNT(HV01 OR HV02,8)<=3 AND HHVBARS(HIGH,9) = 1 AND LLVBARS(LOW,9) >= 8 AND HV03;HV8:= COUNT(HV00,10)>=3 AND COUNT(HV01 OR HV02,9)<=4 AND HHVBARS(HIGH,10) = 2 AND LLVBARS(LOW,10) >= 9 AND HV04;HV9:= COUNT(HV00,10)>=3 AND COUNT(HV01 OR HV02,9)<=4 AND HHVBARS(HIGH,10) = 1 AND LLVBARS(LOW,10) >= 9 AND HV03;HV10:=COUNT(HV00,11)>=3 AND COUNT(HV01 OR HV02,10)<=5 AND HHVBARS(HIGH,11) = 2 AND LLVBARS(LOW,11) >= 10 AND HV04;HXG:= HV1 OR HV2 OR HV3 OR HV4 OR HV5 OR HV6 OR HV7 OR HV8 OR HV9 OR HV10;DRAWICON(FILTER(HXG=1,3),H*1,5);//DRAWTEXT(HXG,H,'分型';//DRAWTEXT(XG,L,'分型',VALIGN0; // ------------------------------------分型
DRAWTEXT(HXG&&BARSLAST(HHH)<=2,H,'开';DRAWTEXT(XG&&BARSLAST(LLL)<=2,L,'开',VALIGN0; // ------------------------------------分型HXG&&BARSLAST(HHH)<=2,SOUND('';XG&&BARSLAST(LLL)<=2,SOUND('';来源: WWW.CXH99.COM
-
文华客服：
有这个未来函数就不可以用这个为标准了吧，很坑人的
- 网友回复： 您根据自身情况自行抉择是否要使用含有未来函数的指标，我们无法给您建议的
有思路，想编写各种指标公式，交易模型，选股公式，还原公式的朋友
可联系技术人员 QQ: 262069696 或微信号：cxh99cxh99 进行 有偿收费 编写！
(注：由于人数限制，QQ或微信请选择方便的一个联系我们就行，加好友时请简单备注下您的需求，否则无法通过。谢谢您！)
相关文章
-
没有相关内容