咨询内容：

多空量能 撑压指标共享！！！适合各周期各品种！！！

本帖最后由 88888ST 于 2015-4-22 12:42 编辑

副图 买卖盘多空指标

VAR:=VOL/((HIGH-LOW)*2-ABS(CLOSE-OPEN));
买盘:IF(CLOSE>OPEN,VAR*(HIGH-LOW),IF(CLOSE 卖盘:IF(CLOSE>OPEN,0+VAR*((HIGH-CLOSE)+(OPEN-LOW)),IF(CLOSE STICKLINE(买盘>0,0,买盘,1,0),COLORRED;
STICKLINE(卖盘>0,0,卖盘,3,1),COLOR00FF00;
DRAWICON(CROSS(买盘,卖盘),(HIGH * 10),4),COLOR00FFFF;
DRAWICON(CROSS(卖盘,买盘),(HIGH * 10),5),COLORFFFF00;



主图叠加 撑压线指标

MA3:=MA(C,3);
X1:=REF(EMA(C,3),1);
X2:=(EMA(C,3)-X1)/X1*100;
N1:=BARSLAST(CROSS(X2,0));
N2:=BARSLAST(CROSS(0,X2));
X3:=CROSS(X2,0) OR CROSS(0,X2);
STICKLINE(N1
STICKLINE(N2
VAR1:=(CLOSE>REF(CLOSE,1) AND CLOSE>REF(CLOSE,2));
VAR2:=(REF(VAR1,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR3:=(REF(VAR2,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR4:=(REF(VAR3,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR5:=(REF(VAR4,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR6:=(REF(VAR5,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR7:=(REF(VAR6,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR8:=(REF(VAR7,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR9:=(REF(VAR8,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARA:=(REF(VAR9,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VARB:=(REF(VARA,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARC:=(REF(VARB,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VARD:=(CLOSE VARE:=(REF(VARD,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARF:=(REF(VARE,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR10:=(REF(VARF,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR11:=(REF(VAR10,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR12:=(REF(VAR11,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR13:=(REF(VAR12,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR14:=(REF(VAR13,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR15:=(REF(VAR14,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR16:=(REF(VAR15,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR17:=(REF(VAR16,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR18:=(REF(VAR17,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR19:=((REF(VARD OR VARE OR VARF OR VAR10 OR VAR11 OR VAR12 OR VAR13 OR VAR14 OR VAR15 OR VAR16 OR VAR17 OR VAR18,1)) AND VAR1);
VAR1A:=((REF(VAR1 OR VAR2 OR VAR3 OR VAR4 OR VAR5 OR VAR6 OR VAR7 OR VAR8 OR VAR9 OR VARA OR VARB OR VARC,1)) AND VARD);
DRAWICON(VAR19 AND REF(CLOSE,1),LOW/1.005,4);
DRAWICON(VAR1A AND REF(CLOSE,1),HIGH*1.005,5);









<!-- 咨询内容：

附件 :

-->

 

博易技术人员： 放入到静态历史K线里还不错，就是不知道实盘时候是什么样，周一看。
楼主，能不能过滤下，你的指标非常敏感，把一段趋势里的各个小回调都发出信号了，能不能在扩大范围，过滤下 本帖最后由88888ST于2015-4-1017:30编辑

http://210.14.65.65:13168/foru...D1877
放入到静态历史K线里还不错，就是不知道实盘时候是什么样，周一看。
楼主，能不能过滤下，你的指标非常敏...


---------------------------------------------------------------------